At a glance......
User Review( vote)
Hair coloring or hair dyeing, is the practice of changing the hair color. The main reasons for this are cosmetic to cover gray or white hair, to change to a color regarded as more fashionable or desirable, or to restore the original hair color after it has been discolored by hairdressing processes or sun bleaching.
Hair coloring can be done professionally by a hairdresser or independently at home. Today, hair coloring is very popular, with 75% of women and 18% of men living in Copenhagen having reported using hair dye according to a study by the University of Copenhagen. At-home coloring in the United States reached $1.9 billion in 2011 and is expected to raise to $2.2 billion by 2016.
Hair Coloring Tips in Home
The following method was not easily formulated. I’ve completely botched my hair dye three times in the 10-plus years I’ve been doing it DIY, but because hindsight is 20/20, I can now pinpoint exactly what went wrong. Learn from my mistakes and get a great dye job on the cheap every time by using these tips.
Don’t Make Drastic Changes
The number one rule of thumb of DIY hair dyeing is to avoid drastic changes. Anytime you want to alter your hair color more than three shades, it’s best to see a pro. Lightening hair sometimes requires a light base, and going extremely dark can result in higher chances of patchy color. If you’re planning an extreme makeover,
Two of the three times I ruined my DIY dye job, I was shooting too high. One resulted in dark, splotchy black, and the other looked a lot more orange than the blonde hue I was going for. The lesson I learned was to self-dye for more natural results by sticking within my color family.
Choose the Right Shade
Don’t make the mistake of heading to the store and just grabbing a box of hair color. Instead, take your time. I tend to buy dye at big box stores because they have the largest range of shades and brands.
Even if you love the model’s hair on the box, there’s little chance your hair is going to look the same as hers. Individual hair thickness, skin tone, and current color can all affect your results for an unpredictable result. Your best bet is to choose a hue based on your skin tone.
Here’s a quick primer on matching skin tone to color:
- If your eyes are brown, blue, or hazel with blue or green flecks, you have a cool skin tone and should choose shades that are cool-toned as well – such as ashy brown, beige blonde, burgundy red, and blue-hued blacks. Cool skin tones usually look best in silver jewelry, so if you naturally gravitate to silver, this is you.
- If your eyes are brown, blue, or hazel with brown flecks, your skin is likely warm-toned and you look best in gold jewelry. Choose hair colors that are similarly golden-toned, like golden brown, wheat-toned blonde, auburn red, and black with reddish tones.
Many hair color brands offer several shades within the tone. The color guide on top of the box usually lets you know if the tone is warm or cool, and shows a realistic picture of how it should turn out on your hair shade. If you’re still wary, try a temporary color, rather than permanent – it should wash out after approximately 28 shampoos.
Prep Your Hair
Color works best with dirty hair, since it lacks the slippery conditioner that freshly washed locks have. Coloring 24 to 48 hours after your last wash is usually fine. That way, color stays on the strands and penetrates better for more predictable results.
Always start with your hair combed into your usual style. That way, you can perfect the color on top before moving to the hair underneath the first layer. This is also the perfect time to change into an old shirt. I prefer a button-up, since it doesn’t need to be pulled over the head (and through a bunch of dye) when it’s time to rinse.
Keep your necessary tools at the ready so you don’t have to waste time searching while your color is processing. Here are some of the things you need:
- Box of Hair Color. If you’re short on time, options such as Clairol’s Perfect 10 have more potent formulas and can process faster, but can also be more damaging to dry hair. My favorite color is a two-way tie between Clairol’s Nice n’ Easy Foam (perfect for beginners since it’s easy to distribute and less likely to miss spots), and L’Oreal Couleur Experte, which contains both color and simple highlights in the same box for a natural look. Each costs anywhere from $6 to $15.
- Plastic Gloves. These should come in the hair color box, attached to the instructions.
- Petroleum Jelly. Rub it along your hairline to prevent staining your skin. If you’re out of petroleum jelly, any thick lotion works.
- Comb. Get any kind from your local store.
- Hairdresser Clip. These are the long clips your hairdresser uses to hold your hair up when styling. You can get a pack of six for around $2 in the hair aisle of a drugstore, big box store, or beauty supply store. It allows you to focus on saturating sections with color before moving onto the next area.
- Dye Brush. This is like a short paintbrush, which you can buy at beauty supply stores for about $2 to $3. It’s much easier to control the dye with one than applying it with your hands.
- Timer. Any kind can get the job done.
- Conditioner. If dying your hair black, brown, or red, choose a conditioner that’s gentle on colors – those are the first shades to fade and a color-safe conditioner can help preserve them.
You may also need to protect any light-colored counters in your bathroom, since even light hair color formulas can stain. Once you have your tools at the ready, it’s time to do the strand test.
Do a Strand Test
While it may seem like one of the less important steps, don’t make the mistake of ignoring the strand test. It tells you exactly how the hair dye looks on your hair and allows you to adjust processing times accordingly. Just grab a half-inch section of hair that’s not typically visible – I usually take some from behind my ear – apply the dye and wait the amount of time prescribed on the box. Then rinse it off in cool water.
Dry your strand and assess: Do you like the color? Are the results too subtle, requiring extra processing time? If so, try tacking on an extra 5 to 10 minutes, since some people’s hair takes color faster than others. If you’re happy with the test, proceed. If you hate it, be grateful you didn’t do your entire head.
Apply the Color
If you’re just touching up your roots, load up your dye brush and start there. If you’re coloring all over, apply it first to the hair that’s visible when it’s combed into your usual style and then move onto the bottom layers.
This is where your dye brush comes in handy. Brush the dye as close to the roots as possible, and then drag the color down the length of your hair while it’s flat on your head. Continue the process until the entire first layer is saturated. Then, use your hairdresser clip to separate the first inch of the top section and continue the process on the next layer.
Once your head is completely covered, set your timer as prescribed in the color instructions. Starting it when you first begin coloring your hair could mean that your bottom layers don’t get enough processing time.
My best piece of advice for applying the color is to take your time. Hair dye is potent for about 90 minutes after it’s mixed, so you don’t need to hurry the process. Being patient results in even, saturated color instead of splotches and an uneven hue.
Some hair is more resistant to color than others. If you have thick hair or you’re going lighter than your natural hair color, adding heat can help improve dye penetration for better results. You probably don’t have a salon-quality dryer in your bathroom, but any hairdryer should do.
I pop a diffuser (a round attachment with prongs) on my dryer and then focus the heat on my roots. The diffuser is so large that directing the nozzle at your roots means even heat distribution across your head. I usually do this during the last 5 or 10 minutes of processing, and it always gives me better results.
Rinse and Condition
Once your timer goes off, rinse out the color without using shampoo. It may be tempting to just wash it out over the sink, but you could end up leaving color in your hair, which is highly damaging.
Instead, do yourself a favor and hop in the shower so you can wash thoroughly. Add water and scrub your hair with your fingertips as if you’re shampooing. Then, rinse it out and watch the water until it runs clear. Finally, finish up with a good-quality conditioner – there’s usually one in the hair color box. You can also check for dye drips on your skin. If you notice some, use an exfoliating cream and they should come right off.
Style and Assess
Lastly, style your hair as usual and assess the results. Don’t make any snap judgements when your hair is still wet, since water makes your hair look darker than it really is. Instead, use a warm – not hot – hairdryer to style your hair with minimum heat. Then, check out the color in natural light – by a window, for example.
Hopefully you love the result. But if you don’t, there are some ways to fix it:
- Use a Color Remover. Products such as Color Oops can strip dye from hair, but it only works if you dyed it a darker color. If you’ve lightened your hair, it’s likely that hydrogen peroxide was used and your hair has actually been bleached to achieve the result. Since color remover only works to remove artificial pigment and not to replace lost natural pigment, you’re going to need to find other options. Color removers can be damaging, since they use harsh detergents to get rid of bad color, so be sure to use a deep conditioning treatment.
- Use a Clarifying Shampoo. If the color is just a little too dark, you can tone it down by using a clarifying shampoo. Designed to remove products from hair, it uses strong detergents and can actually fade your color to a more acceptable shade. Follow up with a good-quality conditioner and only use clarifying shampoo once a week.
- Use Toning Shampoo. If your gripe is that your lightened hair looks too brassy, use a toning shampoo. Because it’s blue, it counteracts the yellow in your hair to cut the brass and create a brighter, more accurate result. I use toning shampoo regularly because I’m a bottle blonde who leans red. Clairol Shimmering Lights is a must-have to achieve truer color and get rid of the reddish or yellowish tinge that can sometimes accompany a blonde dye job.
- Head to the Salon. If you’ve totally botched the color (and we’ve all been there) it’s time to go to the salon and have it professionally fixed. Don’t be embarrassed – hairdressers see this all the time. While it may be tempting to try and color it again at home, hair dye can be damaging, and redyeing doesn’t guarantee better results the next time around. Instead, see a pro and get a color you know you’re going to love.
- “The Celts”. www.ibiblio.org. Retrieved 27 March 2018.
- “Diodorus Siculus, Library of History – Exploring Celtic Civilizations”. exploringcelticciv.web.unc.edu. Retrieved 27 March 2018.
- The ELEGY for Llywelyn”. www.greghill.wales. Retrieved 27 March 2018.
- BBC. “BBC – Radio 4 Woman’s Hour -The History of Hair Dye”.
- Eighteen Books of the Secrets of Art & Nature. 1661. pp. 82–84.
- Hair Preparations,” Ullmann’s Encyclopedia of Industrial Chemistry. Wiley-VCH, Weinheim (2006). doi:10.1002/14356007.a12_571.pub2
- PCosmetics. The History Press.
- Schwarzkopf >COMPANY >History Milestones of success”. Archived from the original on 2015-02-17. Retrieved 2015-01-14.
- “Hair Color 101: Permanent Hair Color from Clairol Professional”. www.clairolpro.com. Retrieved 2015-10-26.
- p-Phenylenediamine, U.S. Environmental Protection Agency
- “Some aromatic amines, organic dyes, and related exposures”. IARC monographs on the evaluation of carcinogenic risks to humans / World Health Organization, International Agency for Research on Cancer. 99: 1–658. PMC . PMID 21528837.