Stud Finder Home Depot/A stud finder (also stud detector or stud sensor) is a handheld device used with wood buildings to locate framing studs located behind the final walling surface, usually drywall. While there are many different stud finders available, most fall into two main categories: magnetic stud detectors and electric stud finders. There are also some devices employing radar. A stud finder is a very useful instrument that helps in locating studs behind the surface of the wall. Not just studs, it can detect anything that is metallic in nature and its powerful magnets can pierce through any surface to make the detection. They are a must-have for tradespeople and even for DIY works. Some of the stud finders are able to locate AC live wire and can detect them through wood and even plastic. The following is the list of top 10 best stud finders in 2019 you must consider buying for accurate and easy detection through various surfaces.
List Of The Best Stud Finders
Multi-Function Stud Finder
This stud finder is enabled with multi-mode detection. It can detect metals of up to 38mm. It can also detect AC live wire and has got an LCD display with a multi-sensor detector. The signal is indicated by sound and is quickly able to locate edges. It is quick to detect metal studs, joists, rebars, pipes, and live AC wire. Not just stud mode, this can also be used in metal mode and AC mode. The product comes up with a replacement warranty of twelve months.
- Multi-mode Detection: Detects metal studs up to 3/2 in(38mm), metal rebar or pipe up to 3 in(76mm) while AC live wire up to 3 in(76mm)
- Multi-Scanner Stud Finder LCD Display Multi Scanning Multi Function Stud Sensor Detector with Sound Warning for AC Wire, Metal, Wall Studs, Wood.
- LCD Backlit Display and Audible Indication: Illuminated graphical LCD and sound signal indicate mode, detection strength and more
- Functionality: Quickly locates edges and center of metal studs, pipes, rebars, joists behind walls, floors and ceilings, also indicates the presence of live AC wire
Multi-Scanner Wall Stud Finder
This product has an LCD Backlit Display. It is very quick to locate edges and can also locate several metals, including live AC wire. It also has audible indication with heavy detection strength. Moreover, it can detect live wire of up to 76mm, pipe of up to 3 inches, and metal studs of up to 38 mm. The product has 12 months warranty and a lifetime support guarantee. While using the product, it should always be kept flat first. Additionally, it can be used as a metal and AC stud.
Multi Scanning Wall Sensor Stud Finder
This product can also be used as a wood stud. It is easy to use and has got only to buttons. It selects and then probes. Also, it can detect live wire of up to 2 inches. The power gets automatically turned off after 60 seconds. It is a lightweight product and has a single key operate handle. The LCD monitor is very accurate and quickly detects any metal. The package also includes a battery and has a warranty of 12 months.
Multifunctional Wall Scanning Device
This product comes up with a dimension of 10 x 5 x 0.5 inches. Although it requires a battery to operate, the package does not include it. This will fit perfectly in the toolbox and also has got the option of AC wire scanning. The battery required by the device is 9V. It is reliable and gives accurate results. It is long-lasting and has an LCD display. There are two buttons with an On/Off button and an extra button. It is multifunctional and is the best fit for wall scanning.
- SCAN YOUR HOUSE WALLS WITH EASE: Do you want to find all of the wires and studs that are hidden behind the walls of your house? Don’t call a professional electrician and waste a fortune! You can now do this yourself with the help of the Classware stud finder. This multi-scanner can detect studs, ceiling joints, hot AC wires and other metals with very high precision. The procedure is easy, fast and even fun! Try it out and see for yourself!
- YOU DON’T HAVE TO BE A PROFESSIONAL: This small scanning device may be technologically advanced, however, it is very easy to use. Once the stud finder detects a metal, it will emit a beeping sound to notify you. At the same time, the stud material detected will be displayed on the high definition LCD screen. The metal detector has been tested multiple times, so you can be 100% sure that it works. For your convenience, Classware has added a detailed instruction manual to the package.
- POWERFUL AND LONG LASTING BATTERY: Nobody likes tugging and tangled wires. That’s why this wireless metal detector is the best choice! You are only going to need a 9V battery (sold separately) in order to activate the stud finder. Classware has made sure that this metal detecting device does not consume too much energy, so you will not have to replace the powerful battery often. So start scanning the walls and ceiling of your house and don’t worry about the battery.
- PRACTICAL SIZE AND SMART DESIGN: In order to scan your walls and ceilings with the handheld stud finder, you need to hold and move your arm for a long time. Here at Calssware we wanted to make things a bit easier for you, that’s why we made sure that the stud finder is very lightweight! At the same time, the metal detector is ergonomically designed, so you will have the most comfortable and secure grip, without straining your hand and arm.
- YOUR SATISFACTION IS GUARANTEED: Classware has designed the most practical and the best working stud finder. In fact, we’re so confident about our metal detector that we have backed it up with a 30-day satisfaction guarantee.
Magnetic Stud Finder Sensor
This stud finder has accurate detector technology. It has the ability to locate wood studs and metal studs. It has a multi-detection mode and comes with a signal strength indicator. When in action, it quickly tells about the discovered item and the LED gets turned on. It is also effortless to operate and can scan horizontally. It is designed in a specific way, which is very compact to use. Last but not least, it is also very handy to carry and has a comfortable grip.
Zircon StudSensor 70 Center Finding Stud Finder
This electronic stud sensor is able to detect and alerts when finding metal studs, wood studs, and live AC wires. It is powered by Auto Correcting Technology which corrects errors and starts with a stud. This product has LED lights that indicate calibration. There is also a sound signaling system that indicates the location of the stud center. Further, there’s also an erasable wall marker which helps to mark targets. This has many LED lights that can be used in DeepScan and StudScan modes.
- The Zircon SS 70 electronic stud scanner detects the edges and center of wood and metal studs and alerts you of live AC wires helping you easily find studs and avoid hazards
- StudScan mode locates the edges of wood or metal studs up to 0.75 inches (19 mm) deep; DeepScan mode locates targets up to 1.5 inches (38 mm) deep; WireWarning Detection indicates the presence of live, unshielded electrical AC wiring while scanning in StudScan and DeepScan modes
- ACT (Auto Correcting Technology) automatically corrects common user errors, such as when scanning begins over a stud, in both StudScan and DeepScan modes
- "Ready" LED lights to indicate when the stud finder is calibrated and ready for use while the patented SpotLite Pointing System illuminates and the audio tone signal sounds when the stud center is located
- Integrated erasable wall marker enables users to mark targets with the simple push of a button
Studpop Magnetic Stud Finder
This is one of the unique stud finders available today. It is made in the United States and does not require any batteries to operate. It can be used on tile, sheetrock, lath, and plaster. The device comes up with a popper that tells when metal is discovered. It is one of the quickest ways to find studs without any problem. It is very handy and weighs only 0.8 ounces. The stud finder can easily fit in your pocket and the dimensions are 8 x 6 x 2 inches.
- Unlike other stud finders, its indicator moves and clicks when a metal fastener is found.
- Powerful magnets will detect metal fasteners up to 0.5” deep
- Works with most construction types: plaster, wood lath, sheetrock, and metal studs
- The most accurate stud finder. Easy to use, no batteries or calibration required.
- AMAZON CHOOSES COLOR
ProSensor 710 Franklin Sensors ProSensor 710 Precision Stud Finder
This stud finder has multi-sense technology that can be used in multiple locations. It has bright LED lights that track the hidden objects with its location. It makes you easy to visualize the location and is very easy to use. The stud finder can detect multiple studs and there’s also an option of deep scanning. The best thing about this stud finder is that, apart from locating the stud, it also determines the size of the stud. The device weighs only 9 ounces.
- Advanced Multi-Sense technology senses the wall in multiple locations simultaneously
- Bright LEDs lights illuminate to indicate the position of hidden objects - making it very easy to visualize the position of studs
- Identifies the width of hidden objects so that you not only know the position of hidden objects, but so you also know the size of them
- Can identify the position of multiple studs simultaneously
Zircon StudSensor E50-FFP Edge Finding Stud Finder
Like any other stud finder, this device is able to detect metal, wood, and live AC wire. It indicates the presence of any electric wires when used in DeepScan mode. It operates with a 9V battery and gives accurate results. This can be used comfortably as it is designed with an ergonomic grip. It can locate studs up to 38 mm deep. The LCD display is quick to indicate the presence of any stud. This tool can be used comfortably from any angle.
- The Zircon SS e50 electronic stud scanner detects the edges of wood and metal studs and alerts you of live AC wires helping you easily find studs and avoid hazards while mounting a TV, hanging cabinets, installing garage shelving and more
- StudScan mode locates the edges of wood or metal studs up to 0.75 inches (19 mm) deep while DeepScan mode locates targets up to 1.5 inches (38 mm) deep
- WireWarning Detection indicates the presence of live, unshielded electrical AC wiring while scanning in StudScan and DeepScan modes.Operating Temperature:20° to 105°F (-7° to 41°C)
- Patented "Over the Stud" Indicator and SpotLite Pointing System ensure the e50 provides trustworthy results while the ergonomic grip design allows for comfortable use regardless of hand size
- One fully charged 9V battery, not included, is required for the stud scanner to run at optimal performance
CH Hanson 03040 Magnetic Stud Finder
This is a compact and small stud finder that can be used very easily. It is pocket-friendly and requires no batteries to function. You can use it without your hands as it has powerful magnets to detect any stud. When holding, the device gives a gentle touch and includes a soft grip. Weighing at a remarkable 2.4 ounces, this stud finder is made up of the magnet. The dimension is 1.2 x 0.8 x 3 inches and is designed ergonomically. This product is made in China. This product is examined by experts and rated to be the best stud finder in the market.
- Small And Compact, Easily Fits In Pocket
- Powerful Magnets Allows Hands Free Use
- 2 Way Level For Ease Of Marking
- No Batteries Required. Scan Depth: 1 Inch. Rotating Level For Horizontal And Vertical Leveling
How To Choose? Best Stud Finder Home Depot in 2020
Buying a stud finder may seem to be a hectic process as different stud finders have different features like some are electric while others are magnetic. The followings are some of the parameters you have to keep in mind to make the best purchase.
- Frequency – If you happen to use your stud finder regularly and you need it for professional purposes, you should buy a top-quality stud finder so that it can have better detection technology and multiple modes. If you are buying it for the DIY purpose, you can buy a moderate-quality stud finder that does the job good enough.
- Surface Detection – Depending on what surface you will need to inspect, you need to choose your stud finder. For example, a traditional stud finder can spot studs through walls but some of the advanced ones can detect studs through woods and plastic.
- The depth of Detection – The depth of the detection matters a lot and even though you will not have an exact idea of how deep the stud can be, you would at least have some idea depending on the thickness of the wall or any other surface. You should check the specification to match this requirement.
- Apart from these – you should ensure that the detection is accurately shown on an LCD screen that most of the stud finders come with. The audible signal should also be strong and instantaneous.
Stud-Finding Tips
- Don’t touch the wall with either hand while you’re using a stud finder—this can alter its readings.
- Some tools need to calibrate before scanning, so start away from switches, outlets, or light fixtures.
- Apply some painter’s tape over the area you want to scan. It’ll give you a surface on which to mark your findings without having to write on the wall.
- When you detect studs, objects, or live wires, mark them.
- And where you detect a stud specifically, scan above and below that point to make sure it continues to the floor or ceiling. Other readings, not at regular intervals, could be the wiring, plumbing, or ductwork.
- Freshly painted walls may be difficult to scan for up to two to three weeks, due to the moisture in the paint.
Conclusion
Go ahead and buy any of these top 10 best stud finders listed above but you should always keep the parameters in mind to buy a stud finder that can fulfill all your requirements perfectly. Depending on your budget and your preference, you can either buy an electric or a magnetic stud finder.
Shop From Rxharun..
About Us...
Editorial Board Members..
Developers Team...
Team Rxharun.